Convergent Series

learning, using & teaching metal clay, and other aspects of life

Moving Further Along (Month of Earrings #16-17-18)

Posted by C Scheftic on 2010/03/27

This Month of Earrings challenge (I’m well into the second half now!!!) has confirmed something I really knew already: I am drawn to movement.

As I was making the earrings with the orange jasper beads and citrus pattern that I mentioned in my last post, I got to thinking about giving a pair some more movement by hanging a another set (with smaller domes) this way:

Spinner Disk Earrings #7

And I’ll admit something: I had already domed those silver disks so that the texture was on the concave side (as shown in a number of my earlier entries). To get them to work for this pair, I had to put them in my dapping block and get them turned the other way. Whew: It worked!

There are several kinds of movement in both of these as well:

Movement Earrings #5 Movement Earrings #6

The four disks with a curve down the middle are leftovers from something else I tried last summer. (Those were OK, but I wasn’t that crazy about them, so I didn’t continue with that idea. I’d already made these four, however, so I just set them aside, knowing I’d find a use for them eventually.) What I did now was to make four more disks, flat ones, and attach them to the back.

Once everything was fired and polished, I decided to apply a patina to one pair, while leaving the other as “naked” shiny silver. Then I balled up the ends of some pieces of Argentium silver wire, and started adding beads. There’s a little bit of color from the Swarovski crystals at each end. To keep those from hitting the silver, next there are little glass beads of a similar color. And to keep all of that lined up nicely and allow the silver beads in the center to spin on the wires, there’s a column of tiny (11/0) glass seed beads down the middle of each tube. It’s a shame they end up hidden, but they serve a good purpose in there.

Then, the Argentium wires are finished with a wrapped loop, and hung on (purchased) sterling silver earwires. For what it’s worth, the tiny coils on the wires can spin as well, if you really want to fiddle with something that small.

(While I’m at this challenge, I’m also making a lot of the earwires I’m using. But I don’t feel compelled to do that for every piece. I’ll make ones where I want some custom design, but I do not feel compelled to make ones that look like ones I could easily buy. I got into all this because I wanted to make things I couldn’t readily find on the market; when I can find an appropriate component to use, I see that as saving me time that I can then spend on special ones.)

2 Responses to “Moving Further Along (Month of Earrings #16-17-18)”

  1. You sure have been busy Carol. Nice job. Great challenge and I love the earrings you’ve been making. When you’re all done, how about posting a collective photo.


  2. C Scheftic said

    Thanks, Alice.

    Funny, I’d been thinking about how to fit sixty-ish earrings (30 pairs, give or take a few, by the end of the month) into one shot. In the meantime, though, I’m just hoping for enough sunlight before the end of the month to capture the rest of the pieces!

    But, fyi, all the individual shots (and, eventually, any group photos too) can be seen together in my flickr collection for this challenge. It’s at:


Leave a Reply to C Scheftic Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: