Convergent Series

learning, using & teaching metal clay, and other aspects of life

Tripped Up!

Posted by C Scheftic on 2010/11/20

It looks so innocent, doesn’t it? But that little kiln load is what I am guessing led to a lot of hoop-la tonight. It has a few of my pieces for an upcoming holiday show, plus the pieces from my last workshop–that is really what I intended to write about tonight–but I’ll catch that up in a few days now I guess. Because I lost a bunch of time tonight when I lost power in my studio. Just my studio. Not the rest of the building.

When it happened, I was setting up for Open House tomorrow. I figured I’d let this load run while I was doing that. If the set-up went smoothly, I thought I’d have time to finish polishing and labeling my pieces for the show, so I could have them all on display too. Ha! Ha! Ha!

Of course, by the time I lost power, it was late, and dark, and everyone else was gone. (Not real late, but 9 pm-ish). I hunted around (which included hunting for light switches for various stairwells), found a couple electrical panels, tried flipping any circuits labeled in any way likely, no change in my space. I called one member of the community center board, got voicemail. Called another, may have woken him up, but he came over. We went hunting all over the building: what an amazing experience. There are all sorts of rooms behind rooms, and electrical panels in several of them too, some better-labeled than others.

For what it’s worth, there are also multiple furnaces: those are set in closets between rooms, and heat just the adjacent spaces. I have run the kiln a number of times now, but I was thinking that this may have been the first time I’d run it since starting to run the heat, and that might have been the problem.

Well, Sam did find the circuit breaker for my furnace, reset it, and the heat was clearly working again. But no power to the room. We found nothing else, he said he’d just call electrician in the morning. He left.

I had enough light between the hallway and the light outside my window over the front door that I could move around OK. Not really work, but I spent time packing up a bunch of stuff to take home and try to work on. I was just about ready to head out when Patty arrived. She’d gotten the voicemail and had then come right over. She knew exactly where to go for my breaker. It didn’t look tripped, but we turned it off and on again, and everything came back on.

Which of course raises the question of why it tripped in the first place, if the kiln and the furnace are on separate circuits. Phase of the moon, perhaps?

By the time I’d unpacked everything to get back to work, it was nearly two hours later. I stayed to finish the Open House set-up while I let the kiln run through its entire cycle. I’ll have to finish the show-pieces tomorrow night. They must be delivered by Sunday, but at midnight or later, I was just too tired to trust myself with precious pieces….

But I had lights on, furnace running, and the kiln seemed fine that whole time. So I’m just hoping for a good afternoon on Saturday.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: