April Recap: First Classes at Artsmiths
Posted by C Scheftic on 2016/04/30
Some days I think to take photos, other days I don’t. I can find no pattern at all to which is which!
But, whether or not I remembered at any point to stop and take photos, I want to say how much I enjoyed my first month of teaching at The Artsmiths of Pittsburgh!
Our very first class, on April 14, was an easy introductory session, where we covered learning how to texture metal clay, give it some shape (e.g., by drying it over a dome), and embellish it for a bit of extra oompth (e.g., with balls or coils of clay). In all, in three hours, six students completed twenty-one different pieces!
Now, if you’ve worked with metal clays, one thing you know is that you usually should start out with a little more clay than you actually need to make a piece. You’ll roll it out, but then cut it down to the size and shape you want, and trim away the excess. And the question is, always, what to do with the excess? I’ve already written here about this, but the basic options seem to be: make something else (small) with what you have left; get some more clay and add your leftovers to that to make another piece (bigger); or, go to the bother of saving it to do one of the above later on. (Clearly, I lean towards either of the first two!)
And I have to give this group credit for finding ways to use all their clay. First-timer Linda, in particular, kept making smaller and smaller pieces, using the bits she cut out of one piece as elements on their own, and using the final dregs to make tiny ball embellishments.
Everyone’s pieces fired beautifully, but I didn’t think to get a photo of that. No, what I did capture was when, after I’d fished Linda’s last three teensy pieces out of the shot, someone surprised me by pounding on my studio door, and I dropped them back onto the shot. At least, they landed on top, so I didn’t have to search through the whole barrel-full again. Still, can you spot all three pieces in this photo?!! (I think two are pretty obvious, but not the third, which was the center she’d cut out of the little gear/sun-shape.)
Then, on February 21, I taught a “Draped Silver” class. Didn’t take a photo of that group at work…. Don’t have a good photo of all my samples either, but I include here two older pics of two pieces each, one pair in .999 fine silver, and one pair in bronze and copper (because that’s my best one of little “ball nest” embellishments).
In this class, we worked in .960 silver. That allowed us to roll the pieces nice and thin, which is the key to making draped metal clay pieces. It also let us make them fairly thin without having to add a backing or frame for protection.
Several of the folks in this session had taken one of my earlier classes (at Artsmiths or my studio) and had seen a wide range of my textures; for this workshop, however, I took only shallow-texture choices.
The last photo with this post shows the fired and tumbled pieces from this class (though, for some reason I don’t understand, it is not a good representation of any of the colors, nor the textures; though you can see the range of interesting shapes that folks made). The one with wire, beads, and chain (middle of top row) is the one I made as an in-class demonstration. It’s a slightly different color from the other pieces because, before I added the beads and chain, I gave it a very light Liver of Sulphur (LOS) patina and then polished off most of it. But I returned the students’ pieces all shiny-silver, and will let them decide if they want to leave them like that, or if they want to add a patina. I do love patinas but, sometimes, and especially with broad, shallow textures like many of these, I think that pure silver shine is wonderful!
I did have a third class scheduled for April, Woven Silver on April 26 but, as I mentioned before, April was a killer month. (I mean that literally: suddenly, randomly, several friends and parents of friends all died.) It got to the point that I just couldn’t swing that class. I didn’t get a clay order in on time (to get it without express shipping charges) and, even if I had made it to class with clay, it’s not clear where my head would have been. I want workshop participants to know that I am there with them, ready to present, encourage and help! So we rescheduled that one, for May 21.
I’ve got two other classes scheduled for May too. I’m really looking forward to those! More on all that shortly!!
This entry was posted on 2016/04/30 at 22:00 and is filed under Teaching Metal Clay. Tagged: .960 silver, class, domes, draping, fine silver, pendants, The Artsmiths of Pittsburgh. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.