Crazy-busy Season

Life tends to get crazy-busy this time of year, for multiple reasons, some of which I’m sure you can imagine and others would take too long to explain. So I’m just going to list a few events you may want to know about should you be interested in seeing some of my work in person:

• November 30 – December 7: H*liday mART at Sweetwater Center for the Arts, Sewickley, PA


• December 5-6-7: Holiday Gift Shop at the Wilkins School Community Center, Swissvale, PA


• December 5-6-7: Open House in my Studio, to coincide with WSCC’s Holiday Gift Shop


• December 13: Open House at the Hoyt Center for the Arts, New Castle, PA


• December 13-14: Open House in my Studio, to coincide with an Art Studio tour in Regent Square (Swissvale, Pittsburgh, Edgewood, Wilkinsburg), PA


• For other venues, please see the list of Ongoing locations down the right side of this blog.

If you find yourself missing any of those, no problem. Just get in touch with me: leave a comment on this post, or message me via Convergent Series page on Facebook (and, while you’re at it, a Like there would be very much appreciated…). We’ll find a way for you to explore my creations!

I’m not sure how much else I’ll manage to post this month. But I have new designs in the works, new workshop pieces I’m testing out plus, of course, new variations of ongoing favorites in both those categories … and lots more for 2015! I look forward to posting about all of those in the New Year, and I hope you’ll enjoy reading about them too.

2013 Art Buzz Tour — This Weekend!

Have you heard the buzz? Six sites! All in the Pittsburgh area’s “East End” this weekend: Regent Square, Swissvale, and Squirrel Hill. And my studio is one of the locations on it again this year.

I’ve got lots of jewelry on offer, plus a handful of other small adornments.

I also have aloe vera plants that need a new home, babies that i repotted from some of the big ones I keep around. (I do work with hot metals here!) BONUS: small ones are free with a purchase of $35 or more (or a discount can be applied to the price of any of the larger ones if that’s what you prefer).

Plus you’re welcome to share some of my cookies and hot mulled cider. (I also got the makings for cranberry-orange frosties but, with all the snow that’s falling, I’ll save that until there’s a request or I run out of cider, whichever comes first.)

Happy Holidays to all!

How long did it take you to learn how to do this?

So far, I have not made many pieces out of steel. I have used bit of steel as small accents, but only a few times as the main element in my work.

But, over the last few weeks, a number of us who work with and teach about Hadar’s Clays have been doing some explorations with the “Low Shrinkage Steel XT” product. Shown is a photo of a dozen pieces, which are about half of the ones I made during this exercise. While most of them turned out pretty much as I would have expected, there were a few surprises that I’m still trying to understand. I will likely have to make a few more pieces like the surprise-ones (when I find some more time to just explore), to see if the pattern repeats or if the surprises were nothing more than the occasional surprise.

Specifically, we’ve been looking at shrinkage. All metal clays shrink from when you first shape a piece in that medium to when it ends up as fully-sintered metal. Different products shrink different amounts. Some shrink more as they dry (go from wet clay to what we call greenware); others shrink more as they are fired (as the binder burns out and the atoms sinter (arrange themselves into a regular metal structure)).

Even working with just one product, different pieces will shrink different amounts in different directions. This leads to some interesting results, such as the fact that rings (usually) shrink smaller (though how much depends on the size and shape of the ring), the clay around cracks (usually) shrinks away from the opening (thus making it look larger after it’s been fired), and holes (usually) remain about the same size (depending on how big and what shape they are in relation to the clay around them).

With my background in mathematics and statistics, I tend to think of shrinkage as a “degrees of freedom” issue: if a clay wants to shrink a certain percentage and, for some reason, it can’t shrink that much in one direction, it compensates by shrinking more in the direction where it has more freedom to shrink. Except, it’s nowhere near as exact as that might make it sound…. It may vary from one time to the next. It may also vary from one artist to the next.

Why? Is it the amount of water in the clay? The humidity in the air? The altitude at which you work? The attitude with which you work? Phase of the moon? I could go on, but I think you get the idea: some variations are fairly clear while, for others, your guess is as good as mine! (Feel free to suggest additional ideas in the comments: I could use both solid suggestions and a few good laughs!)

But I write all this simply because I wanted to take a moment to say how much I enjoy exploring this entire “powder metallurgy” process: trying slight variations that go increasingly farther away from an original starting point just to see what happens. That is, in relation to the question in the title of this post (which I’ve been asked more times than I care to count) my answer is this: I hope to continue to learn as long as possible. I want to keep adding more information to my store of knowledge but, at the same time, I hope I’m never done learning!

2012 Art Buzz Tour — This Weekend

Have you heard the buzz? It’s even louder this year! Over forty artists! Seven sites! All in the Pittsburgh area’s “East End” this weekend. And my studio is one of the locations on it again this year.

At WSCC (where I’ll be), the Holiday Gift Shop will still be running downstairs, and I am pretty sure that Daviea Davis will have her glass mosaic studio open too, upstairs across the hall from mine.

If you’re in the area, I sure hope you can stop by. To say, “Hello” and “Happy Holidays” at least. If, for some reason, you can’t get yourself there in person, how about leaving a holiday greeting as a “comment” on this blog post. Even having you say just “Hello” or “Happy Holidays” would be much appreciated!

I look forward to seeing / hearing from you, dear readers, so I can extend my best wishes for this holiday season to you too, in return, in a more personal way.

LIttle Silver Boxes (sample #1)

I’ve been playing around with box-shapes lately.

I keep thinking up very complex designs: what can I say, I simply love “puzzle boxes” of all sorts!

But, for silver boxes, at the moment, I’m trying to keep the designs fairly simple because what I’m really making right now are samples for a class I have coming up in my studio early in March (the afternoon of the 3rd or the 6th, as you prefer). [Update: And we’ve added another “section” for those of you south of the ‘burgh: I’ll repeat it again on Saturday, March 12 at Zelda’s down in Bridgeville!] And I really want these particular samples to be ones that even people trying metal clay for the very first time can easily make!

I hope to post several more next month, but I’ve got two ready to share now. The first one, shown here, has been sealed into a “closed” box shape so that it can be worn as a pendant. It’s about an inch across, a little under a quarter-inch deep, and weighs 11.1 grams. Both sides are finished, so it’s fully reversible. (You’ll see another one like that in my next post, which will show something extra-special about that one…) The ones that should appear here a bit later have lids that open.

And, once Spring is on its way, my plan is to have some samples of hinged boxes to show off too. Those are my ultimate goal, but I’m hoping that some of these will help pave (i.e., pay!) the way for those!